Fusion Hemp Oil
Fusion Hemp Oil
Fusion Hemp Oil a natural food safe oil finish containing no solvents. It provides a protective, water-resistant surface.
Hemp Oil will add a slight sheen when used over top of Fusion Mineral Paint and it will make the colour more vibrant.
It is very easy to apply, making finishing your projects a breeze! It is important to apply the Hemp Oil, let it sit a few minutes and then buff the surface to remove any excess Hemp Oil.
You can also use Hemp Oil on bare wood to bring out the natural colours and patina for a beautiful authentic finish.
It penetrates to protect from the inside out. It does not leave a surface film that will chip or scratch.
• Food safe
• No chemicals
• No VOC’s
• 100% natural hemp seed
500 ml (1 pint) bottle - $23 Canadian (approximately $17.50 U.S.)
How to use this product:
Surface must be clean and dry. Apply a small amount of oil to surface using a clean cloth. Rub gently until it is absorbed into milk paint or raw wood finish.
For additional sheen and protection, add 2-4 coats.
With no solvents, drying time is extended, so allow 2 hours between coats and wipe away excess after 12 hours.
Finished piece may take several days to cure.
To maintain, apply a light coat every other year as needed.
To remove scratches, lightly sand blemish, then reapply oil.
A 250 ml (1/2 pint) bottle covers approximately 25 - 40 square feet. Coverage will vary taking into consideration what the oil is being applied to. For example, a previously oiled surface will require very little oil, where as bare wood will require more.
Soap and water cleanup.
Test on an inconspicuous spot prior to using on an entire piece.
Visit Fusion Mineral Paint for more great tips and techniques!